PRODUCTS

PALMY BEST PACK CO.,LIMITED.

Drywall Joint Tape

Glass fiber self-adhesive tape is a coated acrylic copolymer divided into different widths and lengths. The chemical properties of glass fiber are stable. It is not easy to be oxidized. Widely used in wall renovation decoration. Collapse crack repair. Holes and stone tube sheet joints. Construction materials such as gypsum board and cement can also be bonded to prevent cracks in the construction materials. In addition, the glass fiber self-adhesive tape can be compounded with other materials to enhance the toughness and tensile resistance of the composite material, thereby achieving the purpose of enhancing crack resistance. Glass fiber self-adhesive tape has good reduction resistance, good self-adhesion, uniform grid, high strength tensile strength and deformation resistance; simple and convenient operation and easy construction.

-
+
Add shopping cart
SEND EMAIL

Description

  • Very strong tensile strength

  • Self-adhesive

  • Alkali-resistant resin


Applications

Construction method:

  • Keep the wall clean and dry.

  • Stick the tape on the crack and squeeze it tightly.

  • Make sure that the gap is covered with tape, then cut off the excess tape with a knife, and finally apply mortar.

  • Allow it to air dry, then lightly sand it.

  • Fill enough paint to make its surface smooth.

  • Remove the leaking tape. Then notice that all the cracks have been properly repaired, and the surrounding area will be decorated with fine composite materials to make it as clean as new.


Name

Size

Width

Length

Weight (g/m²)

Warp density (tex)

Weft density (tex)

Warp sing fiber strength (N/50mm)

Weft sing fiber strength (N/50mm)

Warp density (root/

25mm)

Weft density (root/

25mm)

Glue content (%)

Fiberglass mesh

9x9/65g

50mm
100mm
200mm

80m
50m
50m

65g±5%

33±2

66±2

≥550

≥500

9±0.5

9±0.5

≥26


Specifications

Packaging Details